Your new card reader has arrived. Yay! Before you jump in and try it out, you'll need to insert the battery and charge it for at least four hours.
Step-by-step instructions
1 Start by lifting from the indented back left corner and take the backplate off of the terminal.
2 Slide the battery into place. Make sure that the gold connectors of the terminal and battery are lined up.
3 Then reattach the backplate by clipping it back into place.
4 Put the charger in where you see the lightning bolt, then plug into the wall. Leave it charging for at least four hours.
5 Done! Now you're ready to turn it on and connect it to your Wifi.
Terminal setup guide: Touchscreen terminal
2. Choose which terminal to set up
3. Choose a device to connect with your touchscreen terminal